<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>https://www.peterverdone.com/wiki/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=Onespeedbiker</id>
	<title>Pvdwiki - User contributions [en]</title>
	<link rel="self" type="application/atom+xml" href="https://www.peterverdone.com/wiki/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=Onespeedbiker"/>
	<link rel="alternate" type="text/html" href="https://www.peterverdone.com/wiki/index.php?title=Special:Contributions/Onespeedbiker"/>
	<updated>2026-11-20T14:32:32Z</updated>
	<subtitle>User contributions</subtitle>
	<generator>MediaWiki 1.46.2</generator>
	<entry>
		<id>https://www.peterverdone.com/wiki/index.php?title=Talk:Main_Page&amp;diff=3916</id>
		<title>Talk:Main Page</title>
		<link rel="alternate" type="text/html" href="https://www.peterverdone.com/wiki/index.php?title=Talk:Main_Page&amp;diff=3916"/>
		<updated>2007-01-23T22:22:33Z</updated>

		<summary type="html">&lt;p&gt;Onespeedbiker: A great article on the grease/ don&amp;#039;t grease BB spindle:&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;A great article on the grease/ don&#039;t grease BB spindle:&lt;br /&gt;
&lt;br /&gt;
http://www.sheldonbrown.com/brandt/installing-cranks.html&lt;/div&gt;</summary>
		<author><name>Onespeedbiker</name></author>
	</entry>
	<entry>
		<id>https://www.peterverdone.com/wiki/index.php?title=Category_talk:Bicycle&amp;diff=3915</id>
		<title>Category talk:Bicycle</title>
		<link rel="alternate" type="text/html" href="https://www.peterverdone.com/wiki/index.php?title=Category_talk:Bicycle&amp;diff=3915"/>
		<updated>2007-01-23T22:18:03Z</updated>

		<summary type="html">&lt;p&gt;Onespeedbiker: Category talk:Bicycle moved to Category talk:Bontrager&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;#REDIRECT [[Category talk:Bontrager]]&lt;/div&gt;</summary>
		<author><name>Onespeedbiker</name></author>
	</entry>
	<entry>
		<id>https://www.peterverdone.com/wiki/index.php?title=Category_talk:Bontrager&amp;diff=3914</id>
		<title>Category talk:Bontrager</title>
		<link rel="alternate" type="text/html" href="https://www.peterverdone.com/wiki/index.php?title=Category_talk:Bontrager&amp;diff=3914"/>
		<updated>2007-01-23T22:18:03Z</updated>

		<summary type="html">&lt;p&gt;Onespeedbiker: Category talk:Bicycle moved to Category talk:Bontrager&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Ever since I bought my Privater in 1998 and now have a Single Speed modified Racelite I have wondered about the evolution of the Bontrager bicycle.&lt;br /&gt;
&lt;br /&gt;
http://www.arkansasvalley.net/bontrager/&lt;br /&gt;
&lt;br /&gt;
is a good site to start..&lt;br /&gt;
&lt;br /&gt;
http://www.eandsweb.com/me/bontrager/&lt;br /&gt;
&lt;br /&gt;
has more details but is limited..&lt;br /&gt;
&lt;br /&gt;
http://www.ridesmarter.com/archives/archive_main.htm&lt;br /&gt;
&lt;br /&gt;
from the horses mouth.&lt;br /&gt;
&lt;br /&gt;
Still a lot of un-answered questions-&lt;br /&gt;
&lt;br /&gt;
What is the differance between a OR and a Race? When did they switch from the squared off frame stickers? What about the two part seat stays? What about the front derailleur pulley? Dates and possible reasons why. Rocklobster Nontragers are made from NOS Tange Prestige from the Santa Cruz Bontrager closure. Does that mean Bontrager frames were made from Tange? I thought they were made from True Temper. What about colors? Did Race and Race Lites come in different colors? Were the colors year specific? &lt;br /&gt;
&lt;br /&gt;
I saw these posts on MTBR&lt;br /&gt;
&lt;br /&gt;
http://forums.mtbr.com/showthread.ph...ontrager+frame&lt;br /&gt;
&lt;br /&gt;
so I know there is a huge knowledge pool out there. &lt;br /&gt;
 &lt;br /&gt;
It can be something as simple as. ***THIS IS JUST AN EXAMPLE*** and not meant to be accurate&lt;br /&gt;
&lt;br /&gt;
1) 1989 Bontrager cycles is born and the OR frame was made.&lt;br /&gt;
2) 1992 Bontrager cycles expands from one man shop to production; OR is discontinued and Race is introduced.&lt;br /&gt;
a) Frame changes; monostay is capped; horizontal to verticle dropouts; canti hanger from pin to welded stud (functional art).&lt;br /&gt;
3) 1994 Frame stickers change from square to pointed; front derailleurs are changed from bottom pull (w/pulley system) to top pull. racelite is introduced.&lt;br /&gt;
4) 1995 Trek buys Bontrager&lt;br /&gt;
5) 1996 Trek introduces Privateer&lt;br /&gt;
&lt;br /&gt;
Again some of this is just made up.  My hope is there are enough Bontrager aficionados out there to make this work.  &lt;br /&gt;
 &lt;br /&gt;
Brad Goodwin&lt;/div&gt;</summary>
		<author><name>Onespeedbiker</name></author>
	</entry>
	<entry>
		<id>https://www.peterverdone.com/wiki/index.php?title=Talk:Cleaning_and_Lubricating_Bicycle_Chains&amp;diff=3903</id>
		<title>Talk:Cleaning and Lubricating Bicycle Chains</title>
		<link rel="alternate" type="text/html" href="https://www.peterverdone.com/wiki/index.php?title=Talk:Cleaning_and_Lubricating_Bicycle_Chains&amp;diff=3903"/>
		<updated>2007-01-20T22:26:19Z</updated>

		<summary type="html">&lt;p&gt;Onespeedbiker: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Being an amateur bike mechanic for about 40 years I have learned one thing; a clean bike is a happy bike. I keep a fleet of about 10 bikes @ work running and do the same things to my less than knowledgably bike owner friends. It amazes me how often just cleaning a bike with a few minor adjustments is all a tune-up usually requires. If you want your bike to work right then you need to keep the drive train clean; as a caveat I must confess that cleaning a bike is a Zen experience for me. &lt;br /&gt;
&lt;br /&gt;
Since I usually ride a single speed the process easier than a multi geared bike, the process is pretty much the same. Shift the front derailleur to the big chain ring and the rear to the small cog. Take a small flat head screw driver to the sides of the derailleur pulleys and turn the cranks so you scrape off the crust of dirt that has accumulated on the pulleys; you will also want to do the same thing with a single speed cog or freewheel and the tensioner pulley if you have one. Do the same thing on the middle chain ring on the front. If you have a rear cassette, this would be a good time to use a the back side of a Park CGS-1 brush (or similar) and knock off the dirt crusted between the cogs. Next you’re going to brush the dirt off the chain. I like to do this where the chain is engaged with the front chainring at the 1:00 to 5:00 position. This way the chain is held in place while you brush the side plates. Start on the inside, and brush the dirt away at a tangent, turning the crank as you go. When you’re finished, do the same thing to the outside plates. After that take your brush to the inside and outside where it is stretched between the chainring and cog/cassette. Once this is done take you brush to the front chainring(s) and rear cog/cassette. I find that brushing off the grit before using any solvent saves time and solvent.&lt;br /&gt;
&lt;br /&gt;
At this point you have to decided if you want to remove the chain to clean it or not. Since it is recommended that you clean your drivetrain after every ride, you may not have the time to do a complete cleaning every time. Assuming you are not going to remove the chain, take a rag with Park’s Chain Brite (there is no other chain cleaner) and clean off the chain as much as possible. While you are going this clean off the middle chain ring as well as possible. This is where having a single speed is a big advantage; no outside ring is in the way. Once you have removed most of the grime, take a dry rag and wipe off the residue. At this point it depends how anal you are. If you look at the chain you will see grime in the larger spaces in the links (these are the spaces the gear teeth do not engage. You can 1) leave it there 2) try and brush them out 3) run a Qtip through the space. The third choice is what I do; it only takes a few minutes and maybe 2-3 Qtips. Run the Qtip from the inside of the chain, down through the link. The bottom swap is the only one that matters. I usually hold a rag in my left hand and push the Q-tip though with by left. After you push the Qtip through the chain, wipe the bottom swab off on the rag and turn it slightly to keep the swap on the shaft. Remember you are using Qtip to push the dirt out, not absorb it with the swap, so it doesn’t matter how dirty it gets. When your done wipe the chain off again with a little Chain Brite and your done. &lt;br /&gt;
&lt;br /&gt;
Now if you decided to remove the chain, do so and place it in a plastic container that can be sealed; a lot of folks use plastic bottles. Fill the container with enough Simple Green to cover the chain and shake (I like to dilute it 1 to 1 for this). Let the chain sit for a minute or two and then shake again. Dump out the chain and dirty cleaner, rinse the chain and repeat until the chain is clean. Once the chain is clean rinse again with water, dry with a rag and let it sit somewhere to dry. Once it’s dry I usually do the Qtip thing because I’m really anal about getting the chain clean. With the chain off you can spray the cassettes and chain rings with Simple Green and scrub off the grime. I usually pour some Chain Brite on the brush to expedite the cleaning process. If you are going to do this, you should pick a warm sunny day so everything will dry thoroughly. Do not use a power hose or concentrate a stream of water near any bearing or area that requires lubrication. &lt;br /&gt;
&lt;br /&gt;
After the chain is dry, use the lube of your choice. I have always been fond of Finish Line products, especially the dry lube during the summer months. I have also been hearing praise for a mixture of Mobile1 oil and turpentine as a wet lube. Something I have to try and get back to later. The lube should be used sparingly to the pin area of the chain. Let the solvent in the chain lube flash off for about 5 minutes and then wipe off the excess.&lt;br /&gt;
&lt;br /&gt;
This may sound like a lot of trouble but it actually takes more time to explain it than it takes to do it. I have spent years streamlining the process so at the end of a ride I can throw the bike on the rack and clean the drivetrain in less than 10 minutes. Believe me, if you like your bike to work, it is worth the bother to keep it clean.&lt;br /&gt;
&lt;br /&gt;
aka brad&lt;/div&gt;</summary>
		<author><name>Onespeedbiker</name></author>
	</entry>
	<entry>
		<id>https://www.peterverdone.com/wiki/index.php?title=Category_talk:Bontrager&amp;diff=3795</id>
		<title>Category talk:Bontrager</title>
		<link rel="alternate" type="text/html" href="https://www.peterverdone.com/wiki/index.php?title=Category_talk:Bontrager&amp;diff=3795"/>
		<updated>2007-01-14T21:39:08Z</updated>

		<summary type="html">&lt;p&gt;Onespeedbiker: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Ever since I bought my Privater in 1998 and now have a Single Speed modified Racelite I have wondered about the evolution of the Bontrager bicycle.&lt;br /&gt;
&lt;br /&gt;
http://www.arkansasvalley.net/bontrager/&lt;br /&gt;
&lt;br /&gt;
is a good site to start..&lt;br /&gt;
&lt;br /&gt;
http://www.eandsweb.com/me/bontrager/&lt;br /&gt;
&lt;br /&gt;
has more details but is limited..&lt;br /&gt;
&lt;br /&gt;
http://www.ridesmarter.com/archives/archive_main.htm&lt;br /&gt;
&lt;br /&gt;
from the horses mouth.&lt;br /&gt;
&lt;br /&gt;
Still a lot of un-answered questions-&lt;br /&gt;
&lt;br /&gt;
What is the differance between a OR and a Race? When did they switch from the squared off frame stickers? What about the two part seat stays? What about the front derailleur pulley? Dates and possible reasons why. Rocklobster Nontragers are made from NOS Tange Prestige from the Santa Cruz Bontrager closure. Does that mean Bontrager frames were made from Tange? I thought they were made from True Temper. What about colors? Did Race and Race Lites come in different colors? Were the colors year specific? &lt;br /&gt;
&lt;br /&gt;
I saw these posts on MTBR&lt;br /&gt;
&lt;br /&gt;
http://forums.mtbr.com/showthread.ph...ontrager+frame&lt;br /&gt;
&lt;br /&gt;
so I know there is a huge knowledge pool out there. &lt;br /&gt;
 &lt;br /&gt;
It can be something as simple as. ***THIS IS JUST AN EXAMPLE*** and not meant to be accurate&lt;br /&gt;
&lt;br /&gt;
1) 1989 Bontrager cycles is born and the OR frame was made.&lt;br /&gt;
2) 1992 Bontrager cycles expands from one man shop to production; OR is discontinued and Race is introduced.&lt;br /&gt;
a) Frame changes; monostay is capped; horizontal to verticle dropouts; canti hanger from pin to welded stud (functional art).&lt;br /&gt;
3) 1994 Frame stickers change from square to pointed; front derailleurs are changed from bottom pull (w/pulley system) to top pull. racelite is introduced.&lt;br /&gt;
4) 1995 Trek buys Bontrager&lt;br /&gt;
5) 1996 Trek introduces Privateer&lt;br /&gt;
&lt;br /&gt;
Again some of this is just made up.  My hope is there are enough Bontrager aficionados out there to make this work.  &lt;br /&gt;
 &lt;br /&gt;
Brad Goodwin&lt;/div&gt;</summary>
		<author><name>Onespeedbiker</name></author>
	</entry>
	<entry>
		<id>https://www.peterverdone.com/wiki/index.php?title=User_talk:Onespeedbiker&amp;diff=3677</id>
		<title>User talk:Onespeedbiker</title>
		<link rel="alternate" type="text/html" href="https://www.peterverdone.com/wiki/index.php?title=User_talk:Onespeedbiker&amp;diff=3677"/>
		<updated>2007-01-11T02:50:14Z</updated>

		<summary type="html">&lt;p&gt;Onespeedbiker: Single Speed Chains; what to use&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Traditionally single speeders used 1/8 inch BMX chains, since most single speed (SS) bikes are just 26&amp;quot; wheel BMX bikes anyway. Other reasons include the fact that SS track bikes and old BMX bikes had 1/8 inch cogs and chainrings and since 1/8 inch chains looked bigger than 3/32 chains they must be stronger. Also 3/32 (7-8-9 speed) multi-speed rated (MSR) chains are designed to derail, something you don&#039;t want to happen on a SS bike. A second look however shows there had been a lot more R&amp;amp;D money thrown at MSR 3/32 chains by Shimano and SRAM, so most 3/32 chains meet or exceed the tensile or &amp;quot;pull&amp;quot; strength of 1/8 inch chains. Since most single speed components available today come in 3/32, it seems logical to use 3/32 chains. On the other hand, while some claim that 1/8 inch chains on 3/32 gears cause more noise and wear than 3/32 chains, the jury is still out on this matter as many more use prefer this set-up. In the real world, it would seem the use of 1/8 inch chains work fine on 3/32 components and some, such as the SRAM PC-7 and KMC Kool chains are stronger. &lt;br /&gt;
&lt;br /&gt;
One issue that comes up from time to time is the use of 1/2 links. The use of a ½ link allows you to vary the chain length by 1/2 inch intervals, rather than one inch with a standard link. This comes in handy when you are trying to convert a bicycle with vertical dropouts. 1/2 links are very plentiful in 1/8 inch and now available in 3/32 inch by spicercycles.com and KMC (i.e. AEBike.com). &lt;br /&gt;
&lt;br /&gt;
So do you need a single speed (non MSR) over a MSR chain? No, not really. Is there any advantage to a 1/8 inch chain? Yes, there can be if you have chainline and/or derailing problems a SS chain can help; and as I said before some are stronger. However if you are using a tensioner such as the early Surly Singleator a 1/8 chain may not work. Additionally if your are having a problem with your Singleator skipping, they work best with a 3/32 “ chain, in the push-up mode, without a 1/2 link, and with the addition of a zip-tie connecting the Singleator arm to the chainstay.    &lt;br /&gt;
&lt;br /&gt;
The tensile strength of a SRAM PC-7 is about 2500 ft lbs and only come in 1/8 inch (and pimp gold); all other MSR SRAM chains (including the PC-58) are around 2023 ft lbs. The KMC Kool chains rate at 2860 ft lbs and come in both 3/32 and 1/8inch. The KMC Z chains (with an H in the model number) also come in both sizes (i.e. the 3/32 Z610H; my choice of chain), rate at 2640 ft lbs and are a bit lighter than the Kool chains. KMC ranks most if their MSR chains at 2314 ft LBS; I have not seen and published data for Shimano chains. &lt;br /&gt;
&lt;br /&gt;
So what chain should you buy? There is a plethora of 1/8 inch chains out there; one of the favorites is the SRAM PC-7 (on the other hand there has been considerable anecdotal information that the SRAM PC-1 (1/8) chain is of low grade and should be avoided).   &lt;br /&gt;
. KMC also makes a line of 1/8 inch (or 3/16 inch if you dare) and 3/32 SS chains. They come in various weights and strengths so you pay your money and make your choice. As far as MSR 3/32 chains go SRAM PC-58 seem to be popular with the anti-Shimano crowd as are the KMC chains. Shimano wise any of the better 7/8 speed HG or IG chains will work; The 9 speed and especially the new 10 speed chains may not work with some BMX cogs and SS chainrings. &lt;br /&gt;
&lt;br /&gt;
As a final caveat there is the question of longevity aka &amp;quot;streaching&amp;quot;. Regardless of what you hear, all chains get longer with use (I&#039;d call that stretching). There are so many factors that go into this &amp;quot;lengthening&amp;quot;, that it&#039;s futile to try and rank one chain over another. Just try and keep your chain clean and lubricated and when it has stretches 1/8&amp;quot; over a foot, replace it.&lt;br /&gt;
&lt;br /&gt;
Also checkout  http://www.sheldonbrown.com/rinard/chain_stiffness.htm and  http://www.63xc.com/gregg/gregchai.htm for some good chain spew.&lt;/div&gt;</summary>
		<author><name>Onespeedbiker</name></author>
	</entry>
</feed>