<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>https://www.peterverdone.com/wiki/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=Shiggy</id>
	<title>Pvdwiki - User contributions [en]</title>
	<link rel="self" type="application/atom+xml" href="https://www.peterverdone.com/wiki/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=Shiggy"/>
	<link rel="alternate" type="text/html" href="https://www.peterverdone.com/wiki/index.php?title=Special:Contributions/Shiggy"/>
	<updated>2026-11-19T12:25:17Z</updated>
	<subtitle>User contributions</subtitle>
	<generator>MediaWiki 1.46.2</generator>
	<entry>
		<id>https://www.peterverdone.com/wiki/index.php?title=Three_Speed_MTB&amp;diff=3592</id>
		<title>Three Speed MTB</title>
		<link rel="alternate" type="text/html" href="https://www.peterverdone.com/wiki/index.php?title=Three_Speed_MTB&amp;diff=3592"/>
		<updated>2007-01-03T19:54:27Z</updated>

		<summary type="html">&lt;p&gt;Shiggy: /* The Good Choice */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;===The Good Choice===&lt;br /&gt;
&lt;br /&gt;
Bontrager offers a hub identical to the $35 hub described below. It cost $79.99. 430g. [http://www.bontrager.com/Mountain/Components/Hubs/6929.php P/N #271412].&lt;br /&gt;
(The Bontrager SS hub is made by Formula. The Nashbar hub is a Novatec. Both hubs are sold under various other brand names.)&lt;br /&gt;
It is different in two ways:&lt;br /&gt;
* Drilled for 32 spokes&lt;br /&gt;
* Quick release&lt;br /&gt;
&lt;br /&gt;
This solves many of the problems with the $35 for a bit more money. In retrospect, I should have used this hub.&lt;br /&gt;
&lt;br /&gt;
===The $35 Hub===&lt;br /&gt;
This hub is offered by several companies at various price points. It is a essentially a Formula BX-2210 BMX Cassette Hub with 135mm spacing and an upgrade to cartridge bearings. It can also be found as a Novatec (Joy) D256SBT. Other companies branding it under their own name are Woodman, Planet-X (On-One), IRO, and Bontrager. Many others may exist, but the cheapest one I was able to find was the Nashbar NF-SSHR. Cost $34.95. That is CRAZY cheap.&lt;br /&gt;
&lt;br /&gt;
One Problem. The hub is drilled for 36 spokes. This is bad. 32 spokes is standard, so this makes parts inventory difficult. It also drives the weight up.&amp;lt;br&amp;gt;&lt;br /&gt;
[[Image:Trixxer1.jpg]]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&lt;br /&gt;
The Nashbar hub includes a sprocket which some of the other companies neglect to include.&amp;lt;br&amp;gt;&lt;br /&gt;
[[Image:Trixxer2.jpg]]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
===Internal parts===&lt;br /&gt;
[[Image:Trixxer3.jpg]]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&lt;br /&gt;
Two bearings in the cassette body. Quality.&amp;lt;br&amp;gt;&lt;br /&gt;
[[Image:Trixxer4.jpg]]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&lt;br /&gt;
[[Image:Trixxer5.jpg]]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&lt;br /&gt;
[[Image:Trixxer7.jpg]]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
===Converting to Quick Release===&lt;br /&gt;
&lt;br /&gt;
The hub comes set up with a bolt-on axle. Pretty lame by modern standards. It needs to be converted to quick release and do on a serious diet. The solid axle is a literal boat anchor.&amp;lt;br&amp;gt;&lt;br /&gt;
[[Image:Trixxer8.jpg]]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&lt;br /&gt;
A generic quick release axle for this hub would be 146mm wide with a 10X1mm thread. Since this is a special axle type, a replacement must be sourced from a similar hub spare parts list.&lt;br /&gt;
Since Bontrager is now using this hub in both itterations, #250795 Bolt-on and #271412 Quick Release, we can source parts through the local Trek dealer. Quick release axles for it, #SP-271397-TRE, can be ordered for $20.&lt;br /&gt;
&lt;br /&gt;
The Bontrager hub retails for $79.99. It&#039;s a good price, but we can make that cheaper.  Our total hub cost with new axle is now $54.95. Nice.&lt;br /&gt;
&lt;br /&gt;
===Gearing The Cassette===&lt;br /&gt;
Since 8 speed lockrings with cogs integrated on them are available, it is best to construct the cassette with 8 speed spacing. The cassette lockring is a standard ISO 1.375x24T right hand thread lockring. Same as old school bottom brackets. I replaced the cheapo one with a nice old Suntour version that I had in stock.&lt;br /&gt;
&lt;br /&gt;
I had a few 9 speed cogs laying around to construct this mock up. Make sure to use cogs with shift ramps if you possibly can.&lt;br /&gt;
&lt;br /&gt;
&amp;lt;br&amp;gt;[[Image:Trixxer6.jpg]]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[Image:Trixxer9.jpg]]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&lt;br /&gt;
A 15-18-21, nine speed spaced, 3 speed cassette.&amp;lt;br&amp;gt;&lt;br /&gt;
[[Image:Trixxer10.jpg]]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
===Four Speed?===&lt;br /&gt;
&lt;br /&gt;
A Uniglide threaded cog, if you can find one (8spd), at the end of the cassette might be used instead of the lockring to make this into a four speed cassette. This has not been proven yet, but it may be possible.&lt;br /&gt;
&lt;br /&gt;
Since Uniglide parts are almost extinct, two options still exist:&lt;br /&gt;
* Surly makes [http://www.surlybikes.com/parts/trackcogs_pop.html Track Cogs]. They are threaded at ISO 1.375x24T and come in two widths, 3/32&amp;quot; (8spd) and 1/8&amp;quot; (1spd). They are also available in tooth options from 13 to 22.&lt;br /&gt;
* Shimano Dura-Ace Track Cogs are commonly available in 13 to 16 teeth in both 3/32&amp;quot; and 1/8&amp;quot; widths.&lt;br /&gt;
&lt;br /&gt;
===Chainline===&lt;br /&gt;
&lt;br /&gt;
With the cassette described above and a small spacer on the back side of the cassette, the chainline for this rear end comes to 48.5mm. Quite narrow, but possible using some extremly short square taper bb&#039;s.&lt;br /&gt;
&lt;br /&gt;
===Zero Dish?===&lt;br /&gt;
&lt;br /&gt;
The wheelbuilding info on this hub is as follows:&lt;br /&gt;
:*Diameter of Hub at spoke hole circle: 58mm&lt;br /&gt;
:*Right (drive side) center of hub to flange: 34mm&lt;br /&gt;
:*Left(brake side) center of hub to flange 38mm&lt;br /&gt;
:*Diameter of individual spoke holes: 2mm&lt;br /&gt;
&lt;br /&gt;
So, the dish is off by 4mm and spoke length works out to be 262mm (left) and 261mm (right) when 3 crossing a Mavic XM321 rim.&lt;br /&gt;
&lt;br /&gt;
This is fine. At least the spaceing erred on giving a wider hub flange spacing, 72mm. That is almost 6mm wider than my Hadley single speed hub (66.4mm).&lt;br /&gt;
&lt;br /&gt;
This is going to make quite the bomber wheel.&lt;br /&gt;
&lt;br /&gt;
[[Category:Bicycle]]&lt;br /&gt;
[[Category:Drivetrain (Bicycle)]]&lt;/div&gt;</summary>
		<author><name>Shiggy</name></author>
	</entry>
	<entry>
		<id>https://www.peterverdone.com/wiki/index.php?title=The_BEST_Headset&amp;diff=3337</id>
		<title>The BEST Headset</title>
		<link rel="alternate" type="text/html" href="https://www.peterverdone.com/wiki/index.php?title=The_BEST_Headset&amp;diff=3337"/>
		<updated>2006-12-12T01:50:18Z</updated>

		<summary type="html">&lt;p&gt;Shiggy: /* Why not a Chris King headset? */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;===The Best===&lt;br /&gt;
The finest, greatest performing headset that I have ever owned is also one of the best values, the [http://www.canecreek.com/s-3.html Cane Creek S-3]. Commonly available for around $30.&lt;br /&gt;
&lt;br /&gt;
===Why not a Chris King headset?===&lt;br /&gt;
Back in the day of threaded 1&amp;quot; steerers, only two real performance options existed for bicycles, the [http://www.campagnolo.com/pdf/Spares94_A.pdf Campagnolo Record HS-01OR] Headset or the [http://www.chrisking.com/headsets/hds_2nut.html Chris King Two Nut] headset. Both were fantastic options for both on and off road.&lt;br /&gt;
&lt;br /&gt;
Then came oversized threadless steerers and new developements. Chris King was first to the punch and arguably holds a patent on the design, but slowly the others followed and improved their designs. For many years, the [http://www.chrisking.com/headsets/hds_nts.html Chris King NoThreadset] headset was the only quality choice available, but recently things have changed.&lt;br /&gt;
&lt;br /&gt;
Correction: Dia-Compe USA (now Cane Creek) invented the threadless headset (the Aheadset TM) and holds the patent on the design. The use of the compression washer is a key part of the patent and is why Chris King uses the o-ring method instead.&lt;br /&gt;
&lt;br /&gt;
The real Achiles Heal of the Chris King design is the way that the top plate is held concentric to the steerer tube. An o-ring is used to hold the top plate centered. The problem with this design is that when strong enough forces are introduced to the fork, the o-ring gives a little and the steerer is pushed off center of the headset. Many people will see wear marks on their aluminium steerers and a wear pattern on the taper of the base and top plate. Wear will also be noticable between the top plate and the first spacer or stem if the delrin shim is not in place (you were wondering what it was for?).&lt;br /&gt;
&lt;br /&gt;
One possible argument for this is that the o-ring acts almost like a shock absorber for the bearings, transfering wear to more cheaply replaced parts. I don&#039;t buy it thought.&lt;br /&gt;
&lt;br /&gt;
Keep in mind that I have a lot of respect for what King has done for cycleing and the quality and products that he has brought to market. I just wish that the design for the headset gets fixed.&lt;br /&gt;
&lt;br /&gt;
===What is so great about the Cane Creek S-3?===&lt;br /&gt;
The cheaper option to the [http://www.canecreek.com/s-8.html Cane Creek S-8], the [http://www.canecreek.com/s-3.html Cane Creek S-3] is about the greatest value and performer on the market.&lt;br /&gt;
&lt;br /&gt;
*First, the price. This headset is commonly available for around $26, 1/5 the cost of a Chris King headset. An S-8 will set you back around $55, twice the cost.&lt;br /&gt;
&lt;br /&gt;
*Second, the performance. This headset like the King, use quality sealed cartridge bearings to function, but rather than use an o-ring, the cane creek (like many other competitors) use a compression ring to hold the steerer in line with the headset. This design holds solid and does not move like the King design. The increase in performance is noticable.&lt;br /&gt;
&lt;br /&gt;
These two points make the Cane Creek a hands down winner for best headset.&lt;br /&gt;
&lt;br /&gt;
===Addition reasons for the S-3&#039;s rule===&lt;br /&gt;
A recent problem experience by the off road cyclist is that frame and fork manufactures are not on the same page all the time and forks will sometimes hit the down tube when spun in a crash. This damages the fork, usually, and sometimes the frame.&lt;br /&gt;
&lt;br /&gt;
Cane Creek has recently released the [http://www.canecreek.com/s3_plus_5.html S-3 Plus 5], The same design as the S-3, but with 5mm more lower stack height to give the forks more clearance. Chris King has done nothing about this problem.&lt;br /&gt;
&lt;br /&gt;
[[category:bicycle]]&lt;/div&gt;</summary>
		<author><name>Shiggy</name></author>
	</entry>
</feed>