View source for PVD The Girly Bike

This is a special bike for my wife. A mountain bike. She is very light and rides very light. Making a light bike is one thing, getting it to flex just right is quite another.

It's going to be capable of single speed or gears. She's probably not going to ride the bike much, 'cause she likes her suspension bike so much, but this will give us maximum flexibility with just a little more weight for this goofball bike.

===The Print===

===The Tubes===
*Top Tube: True Temper OX Platinum #01, 25.4 OD, 620mm, .7/.4/.7
*Down Tube: True Temper OX Platinum #06, 31.8 OD, 620mm, .7/.4/.7
*Seat Tube: True Temper OX Platinum #05, 28.6 OD, 620mm, .7/.4/.7
*Seat Stays: True Temper OX Platinum #SS1
*Chain Stays: True Temper OX Platinum #CS3

*Head tube: [[PVD Head Tube|Custom machined tube]]

*Bottom Bracket: Paragon 1.5"
*Drop Outs: Paragon Sliders or IF disk DO's
*Hydo Stops: Paticini SS Stamped [http://www.bikelugs.com/productimages/STAINLESS%20HYDRO%20GUIDE.JPG Bikelugs.com]

===The Paint===
It's going to be a cheap powder coat pink. Hopefully the cost will be less than $150.

===The Complete===

===The Ride===

[[category:Bicycle]]
[[category:Frame Building]]