Choosing a Small Sprocket: Difference between revisions

From Pvdwiki
Jump to navigationJump to search
No edit summary
 
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
Chain Sprockets are effectively regular polygons. Because of this, when the small sprocket is pulling the chain a pulse is created in the system.
It is important not to choose a sprocket too small for the smoothest power transfer.
Most engineering manuals suggest that 17 teeth be a minimum for high speed systems.
This graph shows how the lower leverage postion compares to the higher leverage postion as the sprocket rotates. (pitch /(2*TAN(PI()/ teeth ))) / (pitch /(2*SIN(PI()/ teeth )))


[[Image:Cog-Variance-from-round.gif]]<br>
[[Image:Cog-Variance-from-round.gif]]<br>
==More Info==
For comparison purposes, here are many of the common bicycle and motorcycle sprockets.
[[Image:Cog-Variance-from-round-all.gif]]<br>
==See Also==
http://www.mathwords.com/a/area_regular_polygon.htm<br>
http://www.mathopenref.com/polygonregulararea.html<br>


[[category:Bicycle]]
[[category:Bicycle]]

Latest revision as of 17:31, 27 October 2007

Chain Sprockets are effectively regular polygons. Because of this, when the small sprocket is pulling the chain a pulse is created in the system.

It is important not to choose a sprocket too small for the smoothest power transfer.

Most engineering manuals suggest that 17 teeth be a minimum for high speed systems.


This graph shows how the lower leverage postion compares to the higher leverage postion as the sprocket rotates. (pitch /(2*TAN(PI()/ teeth ))) / (pitch /(2*SIN(PI()/ teeth )))




More Info

For comparison purposes, here are many of the common bicycle and motorcycle sprockets.


See Also

http://www.mathwords.com/a/area_regular_polygon.htm
http://www.mathopenref.com/polygonregulararea.html