Damping: Difference between revisions

From Pvdwiki
Jump to navigationJump to search
Line 3: Line 3:


===A little Theory===
===A little Theory===
Before going any further with the topic of damping, a very useful graphical explanation should be understood. Essentially this is how modern motorcycle cartridge fork and rear shock damping works. This image was scanned from the SAE Shock Absorber Handbook (p.244). The horizontal scale (Q) denotes velocity, while the vertical scale (P) denotes damping force.
A very useful graphical explanation should be understood. Essentially this is how modern motorcycle cartridge fork and rear shock damping works.


Oil flow is used to create damping. This flow is created by the damping rod displacing fluid in one part of the shock and moving it to another part of the shock. The damper rod area multiplied by the total travel available is the total volume of fluid that will ever be displaced.  
Oil flow is used to create damping. This flow is created by the damping rod displacing fluid in one part of the shock and moving it to another part of the shock. The damper rod area multiplied by the total travel available is the total volume of fluid that will ever be displaced.  
Line 16: Line 16:
[[Image:Modern-damping-flow.jpg|left|frame|SAE Shock Absorber Manual, p. 284-6]]
[[Image:Modern-damping-flow.jpg|left|frame|SAE Shock Absorber Manual, p. 284-6]]
<br style="clear:both;"/><br>
<br style="clear:both;"/><br>
The horizontal scale (Q) denotes velocity, while the vertical scale (P) denotes damping force.


[[Image:Modern-damping-shimstack.jpg|left|frame|SAE Shock Absorber Manual, p. 284-6]]
[[Image:Modern-damping-shimstack.jpg|left|frame|SAE Shock Absorber Manual, p. 284-6]]

Revision as of 15:27, 28 October 2006

What damping does and doesn't do

A little Theory

A very useful graphical explanation should be understood. Essentially this is how modern motorcycle cartridge fork and rear shock damping works.

Oil flow is used to create damping. This flow is created by the damping rod displacing fluid in one part of the shock and moving it to another part of the shock. The damper rod area multiplied by the total travel available is the total volume of fluid that will ever be displaced.

Note that damping force NEVER decreases as velocity increases. If this does happen, the shock is cavitating or failing.

SAE Shock Absorber Manual, p. 284-6



A traditional damper rod type fork would just follow Curve A, or the damping force created by oil passing through a simple slow speed orifice. Curve B, while similar in shape to Curve A, represent the damping curve created by the combination of the simple slow speed orifice and the high speed valve orifices (sans shims). With the introduction of shims over the high speed valve, the true damping is represented by the curve in BOLD. Initially, the damping follows Curve A until enough force is created to start bending the shims open. The shape of the shim stack controls initiation and the shape of the curve through the Transition Region. Once enough force has been generated to bend the shims fully open, the damping curve then follows Curve B.

SAE Shock Absorber Manual, p. 284-6



The horizontal scale (Q) denotes velocity, while the vertical scale (P) denotes damping force.

SAE Shock Absorber Manual, p. 284-6



SAE Shock Absorber Manual, p. 284-6



SAE Shock Absorber Manual, p. 284-6



SAE Shock Absorber Manual, p. 284-6



How it looks inside the system

Öhlin's Manual


Shock Dynamometer Results

See Also

Wikipedia - Damping