Difference between revisions of "PVD Rigid 29er"

From Pvdwiki
Jump to: navigation, search
(The Specs)
(The Specs)
Line 15: Line 15:
  
 
*IS Headtube??? Oops. I goofed up some parts so i'm going to have to use a standard head tube. 4.375"
 
*IS Headtube??? Oops. I goofed up some parts so i'm going to have to use a standard head tube. 4.375"
 +
 +
Welded together using Weld Mold 880 filler wire.
  
 
===The build===
 
===The build===

Revision as of 02:16, 5 May 2007

This bike is my first full solo build. I expect to make a few mistakes. It doesnt matter, it's a stupid bike.

The Specs

  • 73 degree seat tube.
  • 71 degree head tube, for 50mm offset fork.
  • 17.375" chainstays, minimum with sliding dropouts.
  • Clearance for 2.2" tire.
  • 11.75" bb height.
  • 17" C-T Seat Tube.
  • Tubeset is a nova sale set.
  • swapped seat stays for lighter s-bent stays.
  • Paragon sliding drop outs.
  • Crappy BB from a box of Barracuda shells I have laying around.
  • IS Headtube??? Oops. I goofed up some parts so i'm going to have to use a standard head tube. 4.375"

Welded together using Weld Mold 880 filler wire.

The build

Wheel checking the chainstays for actual tire clearance using the largest tire I plan to use. The stays are just tacked at this point, so i can still make subtle changes.
IMG 9308.jpg

IMG 9311.jpg