PVD IS Head Tube: Difference between revisions

From Pvdwiki
Jump to navigationJump to search
Line 12: Line 12:


===Machining===
===Machining===
A bushing was required to hold the part during machining.
===Finishing===
===Finishing===



Revision as of 23:41, 30 July 2007

Most framebuilders that work with steel have ignored the newer integrated headset design. I belive that it is the future. I decided to make up some very special head tubes for my bike projects.

Design

Stock

The 4130 stock required for this part is very rare. 1.750 OD x .250 Wall.

I ended up ordering the stock from Factory Steel and Metal Supply Co. out of Detroit, MI.

The price was $18.70 per foot with a $20 cut charge from 20 foot lengths. A six foot section should be enough to get 14 x 4.5" tubes.

Machining

A bushing was required to hold the part during machining.

Finishing