Aluminum Radiator Repair: Difference between revisions

From Pvdwiki
Jump to navigationJump to search
Line 7: Line 7:
===The Solder===
===The Solder===


Aluminum solder exists. I could not get it to work.
Aluminum solder exists. I could not get it to work.<br>
 
[[Image:Alsolder500.jpg]]<br>
[[Image:Alsolder500.jpg]]<br>
<br>
<br>

Revision as of 00:37, 31 July 2007

Tig Welding

The solder did not work for this repair. Nothing seemed to get the solder to stick to the radiator. In the end, I TIG welded the hole. It was tough. I used a 1/16" electrode at 40 amps and 3/32 filler wire. I would have loved a smaller electrode and wire, but this stuff is small as it is.

Here is the results:

The Solder

Aluminum solder exists. I could not get it to work.



ALSOLDER 500, PDS-Flow at 482°F.
Stay-Clean Aluminum Flux, PDS- A honey like liquid flux.

Kit Price - $27.37 from Praxair.

The Torch

Mapp gas (C3H4) produces a flame temperature of 5301° F (2927° C)
Propane gas (C3H8) produces a flame temperature of 4325° F (2385°C)


Cleaning the Solder Area