PVD IS Head Tube: Difference between revisions
From Pvdwiki
Jump to navigationJump to search
| Line 16: | Line 16: | ||
===Finishing=== | ===Finishing=== | ||
===End Product=== | |||
[[Image:Is head tube 3.jpg]] | |||
[[Image:Is head tube 3.jpg]] | |||
[[Image:Is head tube 3.jpg]] | |||
[[category:Bicycle]] | [[category:Bicycle]] | ||
[[category:Frame Building]] | [[category:Frame Building]] | ||
Revision as of 17:24, 1 August 2007
Most framebuilders that work with steel have ignored the newer integrated headset design. I belive that it is the future. I decided to make up some very special head tubes for my bike projects.
Design
Stock
The 4130 stock required for this part is very rare. 1.750 OD x .250 Wall.
I ended up ordering the stock from Factory Steel and Metal Supply Co. out of Detroit, MI. EMJ Metals out of Freemont would be another good choice.
The price was $18.70 per foot with a $20 cut charge from 20 foot lengths. A six foot section should be enough to get 14 x 4.5" tubes.
Machining
A bushing was required to hold the part during machining.

