Intense M6 DH Bike: Difference between revisions
From Pvdwiki
Jump to navigationJump to search
| Line 25: | Line 25: | ||
===Spring=== | ===Spring=== | ||
*Labled "Manitou 350x3.5" | *Labled "Manitou 350x3.5" | ||
*193mm Free Length | *193mm Free Length | ||
*Max preload 8mm or 185mm length | |||
*Min preload 1mm or 192mm length | |||
*36mm ID | *36mm ID | ||
*54mm OD | *54mm OD | ||
*351 lbs/in measured rate of first inch. | *351 lbs/in measured rate of first inch. | ||
*250# PN: 85-6850 | |||
*300# PN: 85-6851 | |||
*350# PN: 85-6852 | |||
*400# PN: 85-6853 | |||
*450# PN: 85-6854 | |||
===Shock Reducers=== | ===Shock Reducers=== | ||
Revision as of 13:22, 14 June 2008
Specs
- 2008 Intense M6, Medium
- 8" travel front
- 10" travel rear
- IGCG-05 Guide Mount
- 8" front rotor
- 7" rear rotor
Gearing
The bike is currently geared with a 32 tooth chainring and an 11-32 9 speed cassette. This is so that I can actually (Ha! The pain.) ride the bike on some of my local trails. I will bring that up to 36 tooth chainring for chairlifting.
A 36 chainring is a little low for a real DH bike, but since I'm not racing I figure that the lower gear will help me quite a bit when traversing to fun trails away from the lifts.
Crank Length
I got a good deal at a local swap for some 175mm and 165mm Saint cranks (83mm BB). The 175mm cranks are just too long. I wish that I had some 170mm cranks to try. I'm sure that the 165mm cranks will be nice when I'm going big.
Shock & Spring
Shock
- Labled "Manitou SFS Intrinsic - Revox ISX"
- 267mm (10.50") eye to eye
- 90mm (3.50") stroke
- 15mm bump stop
- Product web page
- Service Guide
Spring
- Labled "Manitou 350x3.5"
- 193mm Free Length
- Max preload 8mm or 185mm length
- Min preload 1mm or 192mm length
- 36mm ID
- 54mm OD
- 351 lbs/in measured rate of first inch.
- 250# PN: 85-6850
- 300# PN: 85-6851
- 350# PN: 85-6852
- 400# PN: 85-6853
- 450# PN: 85-6854
Shock Reducers
- Top Spacing - 40mm
- Lower Spacing - 1.3125"
- 0.500" Busing width
- 12mm Bushing Bore
- 8mm Thru bolts
- 0.625" Shoulder
Weight
39.9 lbs before real chain guide. Waiting for part.



