Plastic Repair: Difference between revisions
From Pvdwiki
Jump to navigationJump to search
No edit summary |
|||
| Line 23: | Line 23: | ||
===Plastic Welding Repair=== | ===Plastic Welding Repair=== | ||
===Safety Wire or Zip Tie Repair=== | ===Safety Wire or Zip Tie Repair=== | ||
[[Image:Yellowbox_works.gif|left|frame|http://www.motorbiker.org/blogs.nsf/dx/12232004162354MWEL3H.htm Ricardo Kuhn]] | |||
<br style="clear:both;"/> | |||
===See also=== | ===See also=== | ||
Revision as of 17:28, 11 November 2006
From time to time it is necessary to repair plastic parts and bodywork on a motorcycle. Two main ways exist for doing this, epoxies or plastic welding.
Epoxy Based Repair
Sorry guys, JB Weld is not going to cut it on this job. Devcon and 3M both make products for structural bonding plastic. I used Devcon Plastic Welder 14320 to repair some plastic as a result of a motorcycle crash.
Devcon Plastic Welder is some serious epoxy and it really puts out some fumes. Make sure to work with this stuff in a very well ventalated area.
The mating parts of plastic need to be clean and skuffed for best results. When you can, build up the epoxy to give the joint more structure.
Plastic Welding Repair
Safety Wire or Zip Tie Repair






