PVD IS Head Tube: Difference between revisions
From Pvdwiki
Jump to navigationJump to search
| Line 2: | Line 2: | ||
===Design=== | ===Design=== | ||
[[Image:IS-Head-Tube.gif]] | |||
===Stock=== | ===Stock=== | ||
The 4130 stock required for this part is very rare. 1.750 OD x .250 Wall. | The 4130 stock required for this part is very rare. 1.750 OD x .250 Wall. | ||
Revision as of 17:07, 23 July 2007
Most framebuilders that work with steel have ignored the newer integrated headset design. I belive that it is the future. I decided to make up some very special head tubes for my bike projects.
Design
Stock
The 4130 stock required for this part is very rare. 1.750 OD x .250 Wall.
I ended up ordering the stock from Factory Steel and Metal Supply Co. out of Detroit, MI.
The price was $18.70 per foot with a $20 cut charge from 20 foot lengths. A six foot section should be enough to get 14 x 4.5" tubes.
Machining
Finishing
[[category:Frame Building]
