Aluminum Radiator Repair: Difference between revisions

From Pvdwiki
Jump to navigationJump to search
No edit summary
Line 1: Line 1:
===Tig Welding===
The solder did not work for this repair. Nothing seemed to get the solder to stick to the radiator. In the end, I TIG welded the hole. It was tough. I used a 1/16" electrode at 40 amps and 3/32 filler wire. I would have loved a smaller electrode and wire, but this stuff is small as it is.
Here is the results:<br>
[[http://www.pvdwiki.com/index.php?title=Image:Welded-radiator.jpg]]
===The Solder===
===The Solder===
Aluminum solder exists. I could not get it to work.
[[Image:Alsolder500.jpg]]<br>
[[Image:Alsolder500.jpg]]<br>
<br>
<br>
Line 12: Line 20:
Propane gas (C3H8) produces a flame temperature of 4325° F (2385°C)<br>
Propane gas (C3H8) produces a flame temperature of 4325° F (2385°C)<br>


Either will work fine.


===Cleaning the Solder Area===
===Cleaning the Solder Area===




[[Category:Motorcycle]]
[[Category:Motorcycle]]
[[Category:Powerplant]]
[[Category:Powerplant]]

Revision as of 00:37, 31 July 2007

Tig Welding

The solder did not work for this repair. Nothing seemed to get the solder to stick to the radiator. In the end, I TIG welded the hole. It was tough. I used a 1/16" electrode at 40 amps and 3/32 filler wire. I would have loved a smaller electrode and wire, but this stuff is small as it is.

Here is the results:
[[1]]

The Solder

Aluminum solder exists. I could not get it to work.

ALSOLDER 500, PDS-Flow at 482°F.
Stay-Clean Aluminum Flux, PDS- A honey like liquid flux.

Kit Price - $27.37 from Praxair.

The Torch

Mapp gas (C3H4) produces a flame temperature of 5301° F (2927° C)
Propane gas (C3H8) produces a flame temperature of 4325° F (2385°C)


Cleaning the Solder Area