EBB Frame Shell Modification

From Pvdwiki
Revision as of 16:45, 17 January 2007 by Pvd (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The Problem

After modifying the EBB of my Zion frame to reduce weight, I will now cut the shell of the frame down to 2 3/16" from 2 3/4" to match the new width of the cam. This is a lot of heavy steel that is not being used for anything.

The Cam

The modified cam is 2.1875" wide.
Light-EBB-6.jpg

The EBB Shell

Retrieved from "https://www.peterverdone.com/wiki/index.php?title=EBB_Frame_Shell_Modification&oldid=3858"