Difference between revisions of "Hole Saws and Arbors"

From Pvdwiki
Jump to: navigation, search
 
Line 1: Line 1:
  
 +
 +
 +
===Arbors===
 +
 +
Most hole saw manufacturers provide some way of holding the saw. This is usually done in a less than precise way.
 +
 +
For improved precision and more ridgid foundation to your saws, use an arbor For threaded drill chucks. These are available from several suppliers, but one of the cheapest I found was [http://www.victornet.com Victor Machinery Exchange, Inc.]
 +
 +
Index of VME drill chuck arbors:
 +
 +
DCA-1/2-3824        1/2" Straight to 3/8"-24 Drill Chuck Arbor  $5.90
 +
DCA-1/2-1220        1/2" Straight to 1/2"-20 Drill Chuck Arbor  $5.90
 +
DCA-1/2-5816        1/2" Straight to  5/8"-16 Drill Chuck Arbor  $5.90
 +
DCA-R8-5816        R8 Taper to 5/8"-16 Drill Chuck Arbor      $13.00
  
  
 
[[category:Bicycle]]
 
[[category:Bicycle]]
 
[[category:Frame Building]]
 
[[category:Frame Building]]

Revision as of 14:57, 30 March 2007


Arbors

Most hole saw manufacturers provide some way of holding the saw. This is usually done in a less than precise way.

For improved precision and more ridgid foundation to your saws, use an arbor For threaded drill chucks. These are available from several suppliers, but one of the cheapest I found was Victor Machinery Exchange, Inc.

Index of VME drill chuck arbors:

DCA-1/2-3824 1/2" Straight to 3/8"-24 Drill Chuck Arbor $5.90 DCA-1/2-1220 1/2" Straight to 1/2"-20 Drill Chuck Arbor $5.90 DCA-1/2-5816 1/2" Straight to 5/8"-16 Drill Chuck Arbor $5.90 DCA-R8-5816 R8 Taper to 5/8"-16 Drill Chuck Arbor $13.00