Difference between revisions of "Intense M6 DH Bike"

From Pvdwiki
Jump to: navigation, search
(Spring)
(Specs)
Line 5: Line 5:
 
*8" front rotor
 
*8" front rotor
 
*7" rear rotor
 
*7" rear rotor
 +
==Gearing==
 +
The bike is currently geared with a 32 tooth chainring and an 11-32 9 speed cassette. This is so that I can actually (Ha! The pain.) ride the bike on some of my local trails. I will bring that up to 36 tooth chainring for chairlifting.
 +
 +
A 36 chainring is a little low for a real DH bike, but since I'm not racing I figure that the lower gear will help me quite a bit when traversing to fun trails away from the lifts.
 +
 
==Shock & Spring==
 
==Shock & Spring==
 
===Shock===
 
===Shock===

Revision as of 15:56, 11 June 2008

Specs

  • 8" travel front
  • 10" travel rear
  • IGCG-05 Guide Mount
  • 8" front rotor
  • 7" rear rotor

Gearing

The bike is currently geared with a 32 tooth chainring and an 11-32 9 speed cassette. This is so that I can actually (Ha! The pain.) ride the bike on some of my local trails. I will bring that up to 36 tooth chainring for chairlifting.

A 36 chainring is a little low for a real DH bike, but since I'm not racing I figure that the lower gear will help me quite a bit when traversing to fun trails away from the lifts.

Shock & Spring

Shock

  • Labled "???????????"
  • ???mm eye to eye
  • 75mm visable stroke above bump stop
  • 15mm bump stop. (not all possible)

Spring

  • Labled "Manitou 350x3.5"
  • 193mm Free Length
  • 36mm ID
  • 54mm OD
  • 351 lbs/in measured rate of first inch.

Shock Reducers

  • Top Spacing - 40mm
  • Lower Spacing - 1.3125"
  • 0.500" Busing width
  • 12mm Bushing Bore
  • 8mm Thru bolts
  • 0.625" Shoulder

Weight

39.9 lbs before real chain guide. Waiting for part.

Pics

CIMG6437.jpg

CIMG6438.jpg

CIMG6439.jpg

CIMG6440.jpg