Difference between revisions of "Suspension Fork Geometry Info"

From Pvdwiki
Jump to: navigation, search
(Fox Racing Shox)
(Fox Racing Shox)
Line 36: Line 36:
 
32mm Forks, Fully Extended:
 
32mm Forks, Fully Extended:
  
*80mm, 250.9mm ± 5mm, 39mm offset ± 2.5mm
+
*80mm, 450.9mm ± 5mm, 39mm offset ± 2.5mm
*100mm, 270.9mm ± 5mm, 39mm offset ± 2.5mm
+
*100mm, 470.9mm ± 5mm, 39mm offset ± 2.5mm
*130mm, 300.9mm ± 5mm, 39mm offset ± 2.5mm
+
*130mm, 500.9mm ± 5mm, 39mm offset ± 2.5mm
*140mm, 310.9mm ± 5mm, 39mm offset ± 2.5mm
+
*140mm, 510.9mm ± 5mm, 39mm offset ± 2.5mm
  
 
36mm Forks, Fully Extended:
 
36mm Forks, Fully Extended:

Revision as of 18:21, 30 July 2007

Rock Shox

Rock Shox is really good about getting info to the users. See: RS Service

Reba, Fully Extended: Print

  • 85mm, 458mm ± 5mm, 39mm offset ± 0.5mm
  • 100mm, 473mm ± 5mm, 39mm offset ± 0.5mm
  • 115mm, 488mm ± 5mm, 39mm offset ± 0.5mm

Revelation, Fully Extended: Print

  • 100mm, 478mm ± 5mm, 39mm offset ± 0.5mm
  • 115mm, 493mm ± 5mm, 39mm offset ± 0.5mm
  • 130mm, 508mm ± 5mm, 39mm offset ± 0.5mm

Pike, Fully Extended: Print

  • 95mm, 473mm ± 5mm, 42mm offset ± 2 mm
  • 130mm, 508mm ± 5mm, 42mm offset ± 2 mm
  • 140mm, 518mm ± 5mm, 42mm offset ± 2 mm

Argyle, Fully Extended: Print

  • 100mm, 591mm ± 5mm, 42mm offset ± 0.5mm

Lyric, Fully Extended: Print

  • 160mm, 545mm ± 5mm, 40mm offset ± 0.5mm

Totem, Fully Extended: Print

  • 180mm, 565mm ± 5mm, 42mm offset ± 0.5mm

Marzocchi

Marzocchi is not bad about providing info. see: Marzocchi USA

Fox Racing Shox

Fox is really hard to deal with regarding getting prints. This info is what I was given over the phone, but it apears to be wrong.

32mm Forks, Fully Extended:

  • 80mm, 450.9mm ± 5mm, 39mm offset ± 2.5mm
  • 100mm, 470.9mm ± 5mm, 39mm offset ± 2.5mm
  • 130mm, 500.9mm ± 5mm, 39mm offset ± 2.5mm
  • 140mm, 510.9mm ± 5mm, 39mm offset ± 2.5mm

36mm Forks, Fully Extended:

  • 160mm, 545.3mm ± 5mm, 37mm offset ± 2.5mm

40mm Forks, Fully Extended:

  • 203mm, 571.2mm ± 5mm, 45mm offset ± 2.5mm