Difference between revisions of "Tuning Rock Shox Dual Air Forks"

From Pvdwiki
Jump to: navigation, search
(The Air)
 
(16 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
===The Air===
 
===The Air===
#The sum of the pos/neg pressures relate to the fork's actual spring rate.
+
*The sum of the pos/neg pressures ''relates'' to the fork's actual spring rate.
#The pos/neg distribution adjusts ride height.
+
::Why? Because Hooke's Law is counter intuative at times. Stacking springs reduce the system rate, opposing springs increase the system rate. This has nothing to do with equalibriam or the forces, just how the forces will change with displacement. While the pressures and forces at each side of the fork will change, since they are constantly in interplay with the air spring system, they will always be increasing the rate of the system.
#Make sure to remove all the spacers from inside the fork. Use pos/neg air Distribution to adjust the bump travel.
+
*The pos/neg distribution adjusts ride height.
#Simple.
+
*Make sure to remove all the spacers from inside the fork. Use pos/neg air Distribution to adjust the bump travel.
 +
*Simple.
 +
 
 +
 
 +
=== HERE'S THE TRICK: ===
 +
 
 +
*Fill the forks with air with two pumps and gauges. One side effects the other, so you have to do them both at the same time to get predictable results.
 +
*The goal is to have both pressures the same, but this may not be possible if the geometry of the bike needs additional adjustment with ride height. If the pressures are way off, you may need a longer or shorter fork.
 +
*Use positive to adjust springs at the bottom of travel
 +
*Use negative to adjust ride height.
 +
*Subtle changes in oil volume on the damper side makes a huge difference in bottoming feel.
 +
===What Rock Shox Says===
 +
 
 +
[[Image:RS-air-spring-info.gif]]
  
 
===The Floodgate===
 
===The Floodgate===
  
Make sure to set the floodgate to the lowest setting that produces a solid pedaling platform. The fork should be active over any bumb in the trail.
+
Make sure to set the floodgate to the lowest setting that produces a solid pedaling platform. The fork should be active over any bumb in the trail. Many people make the mistake of setting this feature way too high.
  
 
===The Rebound===
 
===The Rebound===
Line 15: Line 28:
 
===The Oil===
 
===The Oil===
  
The stock fluid on 2007 Rock Shox products is Maxima 85-150 Fork Fluid. The ISO viscosity of this oil is 15.90, a good starting place for any fork either motorcycle or bicycle.
+
The stock damping fluid on 2007 Rock Shox products is Maxima 85-150 Fork Fluid. The ISO viscosity of this oil is 15.90, a good starting place for any fork either motorcycle or bicycle.
 +
 
 +
I tend to replace fork fluids with Red Line Suspension Fluid. 28% Red Line (Extra Light,Blue) & 72% Red Line (Light,Yellow) will duplicate ISO 16.
 +
 
 +
Other damping and lubrication options are provided by '15wt (Stock)' oil. Assuming that they are using Maxima for this as well, then the viscosity of this would be ISO 46. Red Line equivilant is 57% Red Line (Medium,Red)& 43% Red Line (Heavy).
 +
 
 +
===Oil Volumes===
 +
Subtle changes in volume on the damper side will make a huge difference.
 +
 
 +
RS Spec:
 +
<br>
 +
[[Image:RS-2005-2006-fluids.gif]]
 +
<br>
  
I tend to replace fork fluids with Red Line Suspension Fluid. 28% Red Line(Extra Light,Blue) & 72% Red Line(Light,Yellow) will duplicate ISO 16.
 
  
 
[[category:bicycle]]
 
[[category:bicycle]]
 
[[category:Suspension (Bicycle)]]
 
[[category:Suspension (Bicycle)]]

Latest revision as of 06:07, 26 August 2007

The Air

  • The sum of the pos/neg pressures relates to the fork's actual spring rate.
Why? Because Hooke's Law is counter intuative at times. Stacking springs reduce the system rate, opposing springs increase the system rate. This has nothing to do with equalibriam or the forces, just how the forces will change with displacement. While the pressures and forces at each side of the fork will change, since they are constantly in interplay with the air spring system, they will always be increasing the rate of the system.
  • The pos/neg distribution adjusts ride height.
  • Make sure to remove all the spacers from inside the fork. Use pos/neg air Distribution to adjust the bump travel.
  • Simple.


HERE'S THE TRICK:

  • Fill the forks with air with two pumps and gauges. One side effects the other, so you have to do them both at the same time to get predictable results.
  • The goal is to have both pressures the same, but this may not be possible if the geometry of the bike needs additional adjustment with ride height. If the pressures are way off, you may need a longer or shorter fork.
  • Use positive to adjust springs at the bottom of travel
  • Use negative to adjust ride height.
  • Subtle changes in oil volume on the damper side makes a huge difference in bottoming feel.

What Rock Shox Says

RS-air-spring-info.gif

The Floodgate

Make sure to set the floodgate to the lowest setting that produces a solid pedaling platform. The fork should be active over any bumb in the trail. Many people make the mistake of setting this feature way too high.

The Rebound

Rebound should be set to provide the plushest 'feel' on rough singletrack. The forks should not feel harsh as that would mean that you have too much (packing) or to little rebound (spiking).

The Oil

The stock damping fluid on 2007 Rock Shox products is Maxima 85-150 Fork Fluid. The ISO viscosity of this oil is 15.90, a good starting place for any fork either motorcycle or bicycle.

I tend to replace fork fluids with Red Line Suspension Fluid. 28% Red Line (Extra Light,Blue) & 72% Red Line (Light,Yellow) will duplicate ISO 16.

Other damping and lubrication options are provided by '15wt (Stock)' oil. Assuming that they are using Maxima for this as well, then the viscosity of this would be ISO 46. Red Line equivilant is 57% Red Line (Medium,Red)& 43% Red Line (Heavy).

Oil Volumes

Subtle changes in volume on the damper side will make a huge difference.

RS Spec:
RS-2005-2006-fluids.gif