Difference between revisions of "Custom Control Cables"
From Pvdwiki
(→Throttle) |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 5: | Line 5: | ||
==Honda== | ==Honda== | ||
===Throttle (HRC)=== | ===Throttle (HRC)=== | ||
| − | *Throttle body end - | + | *Throttle body end - 6mm dia x 7mm barrel (0.232x0.276) |
| − | *Throttle end - | + | :Flanders 620-25362, $0.70 |
| − | *Cable - 1. | + | *Throttle end - 6mm dia x 5mm barrel (0.232x0.197) |
| − | *Housing - 5mm dia | + | :Flanders 620-25362, $0.70 (trim length) |
| + | *Cable - 1.5mm dia (0.061") | ||
| + | :Flanders 610-03110, 1.5mm 7x7 Strand, 50ft. Roll | ||
| + | :Flanders 610-03100, 1.5mm 1x19 Strand, 50ft. Roll | ||
| + | *Housing - 5mm dia (0.197") | ||
| + | :Flanders 610-03315, OD 5.5mm ID 0.086" | ||
| + | |||
| + | Other Parts: | ||
| + | * Ferrule | ||
| + | :Flanders 610-03315, 5.5 ID, .250 od, .440 length. 2.0 drilled, | ||
| + | *Adjusters | ||
| + | :Flanders 620-27264 Hex head adjustor 6 x 1.0 thread, length 1.675” (40mm), drilled for .250” ferrule, 10mm hex head and 10mm hex nut | ||
| + | :Flanders 620-27265 Hex head adjustor 6 x 1.0 thread, length 1.950” (50mm), drilled for .250” ferrule, 10mm hex head and 10mm hex nut | ||
| + | *Midway Adjuster | ||
| + | :Flanders 620-29500 Midway adjuster for throttle or clutch conduit drilled for .250” ferrule, 1/2” adjustment span, length 1.775” | ||
| + | *Cable boot | ||
| + | :Flanders 478-30634 Cable dust boot for single cable. Overall length 60mm with 10 mm round opening. | ||
| + | |||
| − | |||
[[category:Motorcycle]] | [[category:Motorcycle]] | ||
[[category:PVD Sportbikes]] | [[category:PVD Sportbikes]] | ||
[[category:Controls (Motorcycle)]] | [[category:Controls (Motorcycle)]] | ||
Latest revision as of 04:27, 7 November 2007
Supliers
http://www.flanderscompany.com/
http://www.motionpro.com/motorcycle/cables/
Honda
Throttle (HRC)
- Throttle body end - 6mm dia x 7mm barrel (0.232x0.276)
- Flanders 620-25362, $0.70
- Throttle end - 6mm dia x 5mm barrel (0.232x0.197)
- Flanders 620-25362, $0.70 (trim length)
- Cable - 1.5mm dia (0.061")
- Flanders 610-03110, 1.5mm 7x7 Strand, 50ft. Roll
- Flanders 610-03100, 1.5mm 1x19 Strand, 50ft. Roll
- Housing - 5mm dia (0.197")
- Flanders 610-03315, OD 5.5mm ID 0.086"
Other Parts:
- Ferrule
- Flanders 610-03315, 5.5 ID, .250 od, .440 length. 2.0 drilled,
- Adjusters
- Flanders 620-27264 Hex head adjustor 6 x 1.0 thread, length 1.675” (40mm), drilled for .250” ferrule, 10mm hex head and 10mm hex nut
- Flanders 620-27265 Hex head adjustor 6 x 1.0 thread, length 1.950” (50mm), drilled for .250” ferrule, 10mm hex head and 10mm hex nut
- Midway Adjuster
- Flanders 620-29500 Midway adjuster for throttle or clutch conduit drilled for .250” ferrule, 1/2” adjustment span, length 1.775”
- Cable boot
- Flanders 478-30634 Cable dust boot for single cable. Overall length 60mm with 10 mm round opening.
