Difference between revisions of "PVD NYC"
From Pvdwiki
(→Tubes) |
|||
Line 19: | Line 19: | ||
==PVD 650c Disc Fork== | ==PVD 650c Disc Fork== | ||
+ | *340 axel to crown | ||
+ | *35mm offset | ||
+ | *Paragon thin disc tab, cut and mounted for 140mm rotor | ||
+ | *True Temper Versus MSRDLT 28.6mm, 1.65/1.14 Steerer | ||
+ | *True Temper Platnum HOXPLAT-CS4 27.6x20, .76/.56 Oval Blades | ||
+ | *1.000"x0.035" struts @ 45 degrees | ||
+ | *Special Alpha Q Star Nut | ||
+ | *Generic 9mm Dropouts | ||
+ | |||
+ | ==PVD 'Rise' Stem== | ||
+ | *140mm @ 49 Degree | ||
+ | *1.125 Steerer Clamp | ||
+ | *1.250 Split Handlebar Clamp | ||
==650c Paired 16 spoke wheels== | ==650c Paired 16 spoke wheels== | ||
+ | This is an experiment. 16 spokes on a 32 hole hub/rim. The spokes will be configured in a paired configuration at maximum tangency to the hub. Sizing the spokes for 32 4-cross is the same as 16 2-cross, so that gives an idea how the wheel will come together. Two spokes will meet the rim from the forward side of the hub, then two holes are skipped, then two spokes will meet the rim from the rear of the hub. I will be using butted 2mm spokes and the new DT hex nipples to handle the increased tension in the system. | ||
+ | |||
+ | *Alex R390 571x13 rims | ||
+ | *[http://www.dtswiss.com/Products/Components2009/Spokes/DT-competition-silver-(1).aspx DT Competition], 2.0/1.8/2.0 Spokes | ||
+ | *[http://www.dtswiss.com/Products/Components2009/Nipples/DT-hexagonal.aspx DT Hexagonal] Nipple, 12mm, Brass | ||
==Paint== | ==Paint== | ||
− | + | Urban... hummm. | |
==Parts Spec== | ==Parts Spec== |
Revision as of 17:17, 28 December 2008
This is a concept bike that I'm trying out. 650c wheels and disc brakes on a fixed gear drive. Designed more for slow speed manuverability and safety than full speed road handling.
Contents
Tubes
- Down Tube - 1.250 - True Temper HOXPLAT06, 680mm, .7/.4/.7, 89/51/392/38/110
- Top Tube - 1.000 - True Temper HOXPLAT01 620mm, .7/.45/.7, 60/51/381/38/90
- Seat Tube - NOVA External Butt Seat Tube, 28.6/30.0 X 460 [1]
- Chain Stay, Drive - Dedacciai COM12.5 Road 24mm Chainstay, 16/30 OVAL, Straight, [2]
- Chain Stay, Non-drive - Dedacciai COM12.5 Road 24mm Chainstay, 16/30 OVAL, Straight, [3]
- Seat Stays - True Temper HOXRCXSS, 16mm to 10mm, 600mm, 0.61mm wall
- Bottom Bracket - PVD Hollowtech II Shell, Road, 86.5mm wide x 1.75" Ø
- Dropouts - PVD Designed IF Dropouts
- Braze-ons - Pacenti Hydro
- Headtube - PVD Design
PVD 650c Disc Fork
- 340 axel to crown
- 35mm offset
- Paragon thin disc tab, cut and mounted for 140mm rotor
- True Temper Versus MSRDLT 28.6mm, 1.65/1.14 Steerer
- True Temper Platnum HOXPLAT-CS4 27.6x20, .76/.56 Oval Blades
- 1.000"x0.035" struts @ 45 degrees
- Special Alpha Q Star Nut
- Generic 9mm Dropouts
PVD 'Rise' Stem
- 140mm @ 49 Degree
- 1.125 Steerer Clamp
- 1.250 Split Handlebar Clamp
650c Paired 16 spoke wheels
This is an experiment. 16 spokes on a 32 hole hub/rim. The spokes will be configured in a paired configuration at maximum tangency to the hub. Sizing the spokes for 32 4-cross is the same as 16 2-cross, so that gives an idea how the wheel will come together. Two spokes will meet the rim from the forward side of the hub, then two holes are skipped, then two spokes will meet the rim from the rear of the hub. I will be using butted 2mm spokes and the new DT hex nipples to handle the increased tension in the system.
- Alex R390 571x13 rims
- DT Competition, 2.0/1.8/2.0 Spokes
- DT Hexagonal Nipple, 12mm, Brass
Paint
Urban... hummm.
Parts Spec
- Shimano Ultegra Cranks
- Surly Fixed/Disc rear hub (WTB Single Duty Freehub option)
- Shimano Road Cable Disc Brakes
- Shimano Deore XT pedals (Fixed), Shimano PD-A520 (Free)
- Shimano Dura-ace 10spd chain
- 49 Degree x 140mm stem ala PVD
- Headset - Cane Creek IS-2, Black.
- Kalloy Guizzo, 27.2mm 0mm offset seatpost (Thomson option)
- WTB Devo saddle
- Kenda Kaliente 650x23c tires
- Shimano XT Centerlock Front Hub.
- Shimano XT Rotors. 140mm front, 140mm rear
- Handlebar - FSA K-Wing Ergo, 31.8mm, 42cm x 145 drop x 90 reach
- Bar Tape - Fi'zi:k Microtex Synthetic, Black
- Post Clamp - Salsa Lip-Lock, 30.0
- Seatpost - Kalloy Guizzo SPC-100, 27.2mm (Option - Easton EC90 Zero Offset)
- Saddle - WTB Lazer V