Difference between revisions of "Shimming Eccentric Bottom Brackets"

From Pvdwiki
Jump to: navigation, search
(Shiming the Eccentric)
(Hardware Replacement)
Line 11: Line 11:
  
  
===Hardware Replacement===
 
  
The two round head cap screws were replaced with Stainless Steel Cap screws for use with a larger wrench and matirial to grab in a worst-case situation. Now a 5mm allen wrench can be used.
 
 
 
<br>[[Image:Bbshim10.jpg]]<br>
 
  
 
===Greasing and Installing===
 
===Greasing and Installing===

Revision as of 05:57, 1 December 2006

Recently, I put together a 17" 2006 Zion 660EBB Singlespeed frame.

It has an eccentric bottom bracket with dual locking set screws.






Greasing and Installing

Marine Grease. Use marine grease. Its what I use when reaming bottoms.


Test fitting.
Bbshim8.jpg

I also need to find a way to rust proof the edges.
Bbshim9.jpg

Park SPA-2 tool is used to roll the cam.
Bbshim11.jpg

Proudly made in Taiwan.
Bbshim12.jpg