Difference between revisions of "Alfine 8spd internal hub"

From Pvdwiki
Jump to: navigation, search
(Servicing and Special Tools)
(Servicing and Special Tools)
Line 63: Line 63:
 
==Servicing and Special Tools==
 
==Servicing and Special Tools==
  
 +
===Shifting===
 +
TL-AF10 opens the hub for servicing the shifting.
 +
 +
===Bearings===
  
 
==Technical Dopcumentation==
 
==Technical Dopcumentation==

Revision as of 18:49, 22 November 2008

I have a bike that I've been developing. The 28er. It is meant to be the fictional 'one bike'. A bike that can be used on road, off road, commute, full dirt. It will never exist as everyone should know, but a real bike geek will always dream of attainment.

The rise of the Alfine

Alfine is Shimano's high end cruiser parts group. 2009 brings this group to the USA. Along with it a nice internal 8spd disc hub.

Parts and Cost

  • Alfine SGS501 32h Disc brake 8-spd Internal hub Black, QBP# HU7887, $275.00 (MSRP)
  • Alfine SL-S500 8spd Shift lever Black, QBP# LD5705, $50.00 (MSRP)
  • Alfine SG-S501 small parts kit, QBP# HU7889, $15.00 (MSRP)
  • Nexus 16 tooth cog, black, QBP# FW7016

The good

The hub itself is fantastic. It works impressively well. shifting under power, while coasting, while pedaling with only minor blips. I'm hoping figuring out the cable finesse will eliminate all of those.

The bad

Almost everything about the shifter sucks. You can't remove the display, it's low normal, it doesn't have 2 way triggers, the look is just gross. Most noticable is that you are only able to shift one gear at a time. Skipping a few sometimes would make a big difference.

A drop bar hydro STI lever would rule, I'd also like to know if other 8spd STI levers will work with the system.

The hub is heavy. It's weigh in the rear is odd since I am not used to this.

I will be doing more testing to see about seals and offroad performance.

Weight

The Alfine system added 3.5 lbs to the single speed bike weight. While a bit much for pure perfomance, it is in range for someone looking for a bombproof clean drivetrain with good performance.

Gear Reduction

Gear Ratio Total Difference 3.07
Gear Ratio 1 0.527
Gear Ratio 2 0.644
Gear Ratio 3 0.748
Gear Ratio 4 0.851
Gear Ratio 5 1.0
Gear Ratio 6 1.223
Gear Ratio 7 1.419
Gear Ratio 8 1.615

Chainring & Sprocket Choice

I did my first ride as a commute to work. Golden Gate Bridge to Daly City. A perfect sample of San Francisco riding.

I had 32/16 primary gearing with the absolute worst tires for this test, 700x45c knobbies.

The gearing range was near perfect. For street use, I suspect that 34/16 will be really nice with 700x38 slicks, possibly taller.

I will test the 32/16 offroad this weekend.

Cable and Housing

I noticed that the stock cable housing was totally dry out of the box. I lubed the cable with Shimano Special Grease for SP41. That should help from the get go. I also used a sealed end with a grommet at the hub end. I do this on all my cable runs. Makes a huge difference in the life of the housing.

http://img1.qbp.com/6SPsvm45/prodl/LU8403.jpg Shimano SIS SP41 Grease, 50g, Y04180000


http://img1.qbp.com/6SPsvm45/prodl/CA1067.jpg Shimano 4mm sealed end caps, Y6AM98080

Servicing and Special Tools

Shifting

TL-AF10 opens the hub for servicing the shifting.

Bearings

Technical Dopcumentation

SG-S501 8-Speed Internal Hub Gear
http://techdocs.shimano.com/media/techdocs/content/cycle/EV/bikecomponents/SG/EV-SG-S501-2788A_v1_m56577569830646705.pdf
http://techdocs.shimano.com/media/techdocs/content/cycle/SI/37N0A-001_SG-S501/37N0A-001_SG-S501-EN_v1_m56577569830638091.pdf

SL-S500 Shift Lever
http://techdocs.shimano.com/media/techdocs/content/cycle/EV/bikecomponents/SL/EV-SL-S500-2631A_v1_m56577569830625646.pdf
http://techdocs.shimano.com/media/techdocs/content/cycle/SI/ALfine/SL-S500/6M20A-SL-S500-EN_v1_m56577569830599923.pdf

Images

Alfine1.jpg

Alfine2.jpg

Alfine3.jpg

Alfine4.jpg

Alfine5.jpg

Alfine6.jpg

Alfine7.jpg

Alfine8.jpg