Difference between revisions of "PVD IS Head Tube"

From Pvdwiki
Jump to: navigation, search
(End Product)
(End Product)
Line 32: Line 32:
 
Comparing this to a "standard" [[PVD_Head_Tube|PVD light machined head tube]] (93g) and a Chris King 1 1/8" headset (98g), this design doesn't add any real weight but is a far superior design.
 
Comparing this to a "standard" [[PVD_Head_Tube|PVD light machined head tube]] (93g) and a Chris King 1 1/8" headset (98g), this design doesn't add any real weight but is a far superior design.
  
Upper Stack: 8.3mm
+
Upper Stack: 8.3mm<br>
 
Lower Stack: 0.4mm
 
Lower Stack: 0.4mm
  

Revision as of 17:56, 1 August 2007

Most framebuilders that work with steel have ignored the newer integrated headset design. I belive that it is the future. I decided to make up some very special head tubes for my bike projects.

Design

Note the increased strength on the bottom side for extending far below the down tube when using larger forks.

IS-Head-Tube.gif

Stock

The 4130 stock required for this part is very rare. 1.750 OD x .250 Wall.

I ended up ordering the stock from Factory Steel and Metal Supply Co. out of Detroit, MI. EMJ Metals out of Freemont would be another good choice.

The price was $18.70 per foot with a $20 cut charge from 20 foot lengths. A six foot section should be enough to get 14 x 4.5" tubes.

Machining

A bushing was required to hold the part during machining.

Is head tube 4.jpg

Finishing

Special cutters will be required to finish the frame post welding. Cane Creek P/N TL0100. A little under $200 for these babies.

Is head tube 5.jpg

Is head tube 6.jpg

End Product

The head tube came in a little heavy due to a few manual machining considerations and some mistakes I made in the process. I would expect that a perfect CNC version to weigh in at 125g.

Comparing this to a "standard" PVD light machined head tube (93g) and a Chris King 1 1/8" headset (98g), this design doesn't add any real weight but is a far superior design.

Upper Stack: 8.3mm
Lower Stack: 0.4mm

Is head tube 1.jpg

Is head tube 2.jpg

Is head tube 3.jpg

On The Bike

Frame scheduled to be welded mid August.

see: PVD 5.5 Fork Hardtail