Difference between revisions of "PVD The Girly Bike"

From Pvdwiki
Jump to: navigation, search
(The Tubes)
(The Tubes)
Line 16: Line 16:
 
*Bottom Bracket: Paragon 1.5"
 
*Bottom Bracket: Paragon 1.5"
 
*Drop Outs: Paragon Sliders or IF disk DO's
 
*Drop Outs: Paragon Sliders or IF disk DO's
*Hydo Stops: Paticini SS Stamped [http://www.bikelugs.com/productimages/STAINLESS%20HYDRO%20GUIDE.JPG Bikelugs.com]
+
*Hydo Stops: Pacenti SS Stamped [http://www.bikelugs.com/productimages/STAINLESS%20HYDRO%20GUIDE.JPG Bikelugs.com]
  
 
===The Paint===
 
===The Paint===

Revision as of 15:40, 2 July 2007

This is a special bike for my wife. A mountain bike. She is very light and rides very light. Making a light bike is one thing, getting it to flex just right is quite another.

It's going to be capable of single speed or gears. She's probably not going to ride the bike much, 'cause she likes her suspension bike so much, but this will give us maximum flexibility with just a little more weight for this goofball bike.

The Print

The Tubes

  • Top Tube: True Temper OX Platinum #01, 25.4 OD, 620mm, .7/.4/.7
  • Down Tube: True Temper OX Platinum #06, 31.8 OD, 620mm, .7/.4/.7
  • Seat Tube: True Temper OX Platinum #05, 28.6 OD, 620mm, .7/.4/.7
  • Seat Stays: True Temper OX Platinum #SS1
  • Chain Stays: True Temper OX Platinum #CS3
  • Bottom Bracket: Paragon 1.5"
  • Drop Outs: Paragon Sliders or IF disk DO's
  • Hydo Stops: Pacenti SS Stamped Bikelugs.com

The Paint

It's going to be a cheap powder coat pink. Hopefully the cost will be less than $150.

The Complete

The Ride