PVD Tube Bender: Difference between revisions

From Pvdwiki
Jump to navigationJump to search
No edit summary
 
Line 5: Line 5:
===The Failed Press Bender===
===The Failed Press Bender===
I first decided to make a press bender. It didn't work out too well. Either the radius of the bend was too tight, or the concept was not applicable to my standards, or a little of both.
I first decided to make a press bender. It didn't work out too well. Either the radius of the bend was too tight, or the concept was not applicable to my standards, or a little of both.
I figured that this type of bender would make it easier to make mandrels for odd shaped tubes.


The Wheels. Skate bearings make it cheap.<br>
The Wheels. Skate bearings make it cheap.<br>

Revision as of 20:58, 18 June 2007

Bending Concepts

This is from the Tools for Bending Bending Manual, p.3.

The Failed Press Bender

I first decided to make a press bender. It didn't work out too well. Either the radius of the bend was too tight, or the concept was not applicable to my standards, or a little of both.

I figured that this type of bender would make it easier to make mandrels for odd shaped tubes.

The Wheels. Skate bearings make it cheap.

On the press.

Crappy bend

Tool parts packaged up for storage.

The Compression Bender

Here is the solid model of what is currently being built: