Stem Preparation: Difference between revisions
From Pvdwiki
Jump to navigationJump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
===Why=== | |||
Threadless headset systems require a nice sqare face to push against for proper function. Rarely is a cast or fabricated stem faced with any usable precision. You must do this yourself. Machined stems rarely require this treatement. | |||
===How===A simple madrel is made to fit a 1" collet and the 1.125" stem. I prefre to do all work with a collet if I can.<br> | |||
[[Image:Stem face 1.jpg]]<br><br> | [[Image:Stem face 1.jpg]]<br><br> | ||
[[Image:Stem face 2.jpg]]<br><br> | [[Image:Stem face 2.jpg]]<br><br> | ||
Very carefully spin the stem on the lathe. Take as little metal off as needed to get a nice face.<br> | |||
[[Image:Stem face 3.jpg]]<br><br> | [[Image:Stem face 3.jpg]]<br><br> | ||
[[Image:Stem face 4.jpg]]<br><br> | [[Image:Stem face 4.jpg]]<br><br> | ||
Always bag and lable specially made tools. Years later the tool will be clean, in good shape, and clearly marked.<br> | |||
[[Image:Stem face 5.jpg]]<br><br> | [[Image:Stem face 5.jpg]]<br><br> | ||
Revision as of 20:34, 3 May 2007
Why
Threadless headset systems require a nice sqare face to push against for proper function. Rarely is a cast or fabricated stem faced with any usable precision. You must do this yourself. Machined stems rarely require this treatement.
===How===A simple madrel is made to fit a 1" collet and the 1.125" stem. I prefre to do all work with a collet if I can.
Very carefully spin the stem on the lathe. Take as little metal off as needed to get a nice face.
Always bag and lable specially made tools. Years later the tool will be clean, in good shape, and clearly marked.
