Cannondale Headshok Information

From Pvdwiki
Revision as of 18:13, 19 March 2008 by Pvd (talk | contribs) (OE Parts)
Jump to: navigation, search

OE Parts

Pvdheadshok-1.jpg

The end is press-fit/glued into the fork. 1-9/32" shaft diameter. Pvdheadshok-2.jpg

Components

  • 118455, Tele Assy, 80mm, Alum, LC, Honed- $70


  • KF263/, Kit, Damper, Green DLR80, Soft- $100 ($200 Retail)
  • KF264/, Kit, Damper, Blue DLR80, Standard- $100 ($200 Retail)
  • KF265/, Kit, Damper, Red DLR80, Firm- $100 ($200 Retail)


  • HD191/BLK, Kit, Fork Boot, Slim 5 Ridge ($9.99 Retail)
  • HD???/BLK, Kit, Fork Boot, Slim 2 Ridge ($9.99 Retail)


  • 118738L negative spring (soft,green)
  • 118739L negative spring (standard,blue)
  • 118740L negative spring (firm,red)

Headsets and stems

A Cannondale headset and stem must be used with this fron end. The "steerer" diameter is 1.5625" not 1.500".

Headshok-head.gif

Coda Stems

Tools

Headshok Cartridge (Castle) Tool - HDTL146/

Headshok ½” Shaft Clamp Tool - HDTL187/

Upper Bearing Driver - HDTL149/
Pin tool - HD136/

Loctite 262 - for plastic air piston threads Loctite 242 - for damper assembly threads

Recomended Air Pressure

120865.PDF

118608.PDF

Assembly Instructions

Tech Note

Grease and Oil

Factory Grease is Royal Purple Ultra Performance Grease NLGI #2 (ISO 46 BASE).

Headtube

Kirk Pacenti sell special headshok head tubes.

Getting parts from an existing fork

Bob Brown describes the process on one of the older steel stantion forks.

Magura Cartridge

http://www.magura.com/english/produkte_static/produkt_2008_ccs.htm

Action Tec

Pro Shock

Rockshox iRide Option

http://www.sram.com/en/rockshox/pavement/iride/