Difference between revisions of "Reamers"

From Pvdwiki
Jump to: navigation, search
(Metric Hand Reamers)
Line 55: Line 55:
 
1:30
 
1:30
 
[http://www.vidia-v.com/images/PDF%20Listovki/R_dor_en.pdf Vidia-v] Bulgaria.
 
[http://www.vidia-v.com/images/PDF%20Listovki/R_dor_en.pdf Vidia-v] Bulgaria.
 +
 +
[http://www.metricmcc.com/ Metric & Multistandard (MMCC)]
 +
[http://www.metricmcc.com/catalog/Ch5/5-548.pdf M&MS Catalog page 5-548]
  
 
===27.2mm===
 
===27.2mm===

Revision as of 12:28, 19 September 2007

The holy grail of framebuilder reamers for seat tubes is a solid spiral flute hand or chucking reamer. These are very hard to find in the fractional metric sizes common for seatposts.

Silva

Silva Reamer

expensive.

Cyclus Shell Reamers

German bike specific tools. Nice.

The handle costs $81.70 and each shell reamer is another $47.00. Any common size is avaliable. Available throught Bike Tools Etc.

I wish that the reamer was spiral fluted and longer. A longer lead in would also be nicer.

Cyclus-reamer-1.jpg

Cyclus-reamer-2.jpg

Cyclus-reamer-3.jpg

Source for reamers

This is a good one:

KBC Tools & Machinary
1751 Sabre
Hayward, CA 94545
(510) 732-5500
(800) 521-1740
KBCtools.com

Sharpening and Regrinders

I'll be trying these guys at first:

Cliff @
Pacific Reamer & Cutter Service
4115 Broadway
Oakland, CA 94611
(510) 654-1844

They say that a regrind could be $24 for a chucking reamer $40 for a hand reamer, if they do not have to take too much material off. $55 on my job.

English Hand Reamers

ICS Cutting Tools

[1]

Metric Hand Reamers

Metric & Multistandard (MMCC)

M&MS Catalog page 5-540

Metric Shell Reamers

1:30 Vidia-v Bulgaria.

Metric & Multistandard (MMCC) M&MS Catalog page 5-548

27.2mm

Probably the most common size seatpost in the industry for steel bikes.

Spiral Flute Chucking Reamers:
Size: Flute Length: OAL: KBC P/N: Price
1-1/16: 2-3/4: 10-1/2: 5-020-295: $37.40 (26.99mm for roughing)
1-3/32: 2-7/8: 11: 5-020-300: $37.40 (27.78mm reground to 27.2 for finishing)

Spiral Flute Hand Reamers:
Size: Flute Length: OAL: KBC P/N: Price
1-1/16: 5-5/8: 11-1/4: 5-010-150: $43.15 (26.99mm for roughing)
1-1/8: 5-13/16: 11-5/8: 5-010-155: $47.65 (28.58mm reground to 27.2 for finishing)

I was told that Toolmex was the supplier for all of these reamers but they turned out to be sourced from Fenes of Poland. Catalog

toolmex helical shell reamers may be good for the next order.

5-155-030 for 1-1/16" $41.00

Bore Polishing

This simple tool is available for cleaning up a bore.

Bore-polishing.jpg