Difference between revisions of "Tuning Rock Shox Dual Air Forks"

From Pvdwiki
Jump to: navigation, search
(The Air)
Line 1: Line 1:
 
===The Air===
 
===The Air===
#The sum of the pos/neg pressures relate to the fork's spring rate.
+
#The sum of the pos/neg pressures relate to the fork's actual spring rate.
 
#The pos/neg distribution adjusts ride height.
 
#The pos/neg distribution adjusts ride height.
#Make sure to remove all the spacers from inside the fork. Use air Distribution to adjust the travel.
+
#Make sure to remove all the spacers from inside the fork. Use pos/neg air Distribution to adjust the bump travel.
 
#Simple.
 
#Simple.
  

Revision as of 21:34, 13 August 2007

The Air

  1. The sum of the pos/neg pressures relate to the fork's actual spring rate.
  2. The pos/neg distribution adjusts ride height.
  3. Make sure to remove all the spacers from inside the fork. Use pos/neg air Distribution to adjust the bump travel.
  4. Simple.

The Floodgate

Make sure to set the floodgate to the lowest setting that produces a solid pedaling platform. The fork should be active over any bumb in the trail.

The Rebound

Rebound should be set to provide the plushest 'feel' on rough singletrack. The forks should not feel harsh as that would mean that you have too much (packing) or to little rebound (spiking).

The Oil

The stock fluid on 2007 Rock Shox products is Maxima 85-150 Fork Fluid. The ISO viscosity of this oil is 15.90, a good starting place for any fork either motorcycle or bicycle.

I tend to replace fork fluids with Red Line Suspension Fluid. 28% Red Line(Extra Light,Blue) & 72% Red Line(Light,Yellow) will duplicate ISO 16.