Removing Cable Stops and Guides

From Pvdwiki
Revision as of 16:50, 11 December 2006 by Pvd (talk | contribs)
Jump to: navigation, search

Old fashioned cable stops and guides are a serious problem on modern mountain bikes.

The Problem

The use of hydraulic brakes and continous length deraillure housings make the old fashioned type not only useless, but dangerous. They snag clothing and skin leading to tears of each.

The Best configuration

All cable guides should be of the zip tie type, with only one stop for the front deraillure.

Removing the guides

Housingguide1.jpg
The Culpret
Housingguide2.jpg
Saw it off. Be carefull not to damage the frame.
Housingguide3.jpg
Close, but nasty.
Housingguide4.jpg
Start filing with a course file.
Housingguide5.jpg
finish with a smooth file.
Housingguide6.jpg
Sand and scotchbrite for a perfect finish.
Housingguide7.jpg
Always use SATIN finish paints. Gloss and Flat finish paints will always lead to problems.
Housingguide8.jpg
Finished with wet paint. Once dry it will look fine.