PVD Toe Spikes!

***Update 2017-02-23*** Time has proven that the spike configuration seen below is one of the best ways of accomplishing the goal. The importance of the fender washer stack can’t be emphasized enough. It spreads the load of the spike and reduces failure. Very long spikes are hard to justify. Most often, the result in a … Read more

NATO 7.62×51

I’ve been geeking out on guns lately. Sourcing parts to assemble a nice SR-25 Type rifle. More on that later. Here’s a nice print of a NATO 7.62×52 / Winchester .308 round.

PVD Micro-DH – PodRacerOne

This is a pretty special bike. A juvenile DH race bike for my friend Bryan Harrell’s son Jake. Jake has been racing ABA BMX (ranked 4th district CA04) for the past two seasons and is absolutely killing it. As mountain bikers and living in the best place you can for riding trail, it is only natural … Read more

RGB vs. CMYK

This is a quick little thing. Most folks have seen this before but it’s nice to remember. http://en.wikipedia.org/wiki/RGB_color_model http://en.wikipedia.org/wiki/CMYK_color_model A fun project to get working correctly in Ai. Give it a try. Obviously, I had to convert the CMYK colors to RGB for this demonstration to be seen on a light emitting source.  

The Gixxer is back!

Since getting my wrist completely shattered at RFT and not being able to do much of anything, I dropped my motorcycle off to BRG Racing to have some work finished that I had started on my motorcycle. I had the motor half apart already but there was no way that I’d be able to continue the job … Read more

A current print for an upcoming bike.

I’m getting a 29er type bike built for me this winter. All I needed to do was design it. I’m looking for it to be a nice tight fire roadie/crosser that can still ride real singletrack quickly with tires maxing out at 1.9″. Special attention is going to be put into getting the largest chainrings possible … Read more

Trigonometry

I absolutely love trigonometry. It’s how we come to understand circles and curves. I work at the Physics & Astronomy Department at San Francisco State University. Every semester a few students will express their unease, confusion, and problem doing trigonometric work. Over the years, it’s been shown that, all of them, have never been given … Read more

Very fancy dropouts for Firefly Bicycles

A long, long time ago (1998?) I designed the disc brake dropouts for Independent Fabrications. I knew the whole crew there as we had all worked at Fat City Cycles together. The reason for the design was simple, I needed a new bike and I use Shimano parts. That was the moment that Shimano had … Read more

Things going wrong, the bad way.

Things went pretty wrong at the Tara Llanes Classic. I’m bummed. Not just because of getting injured but because I really thought I had a shot at 2nd place in Cat 1, 40+. Grrr. I even had a cool bike for MegaDH. I got kicked off a big jump really bad on my warm up … Read more

MEGA DH !

This weekend is the Tara LLanes Classic. http://www.tarallanesclassic.org/. It’s what is called a Mega DH. Mega DH is essentially Super D’s wicked brother. A very long DH race with no emphasis on real climbing but a bunch of pedalling at high speeds could be involved. The key is that the course will involve true downhill trails … Read more

PodracerOne – Big Evil, Small Package

Jake Harrell is the son of my friend and business partner, Bryan. Fairfax Cyclery!!! Jake and Bryan have been racing a ton of BMX lately and Jake is proving to be a seriously fast kid. He can’t wait to get out with dad and the bros for the downhill rides. Problem: There is really nothing … Read more

BB86 is 30% stronger than BB30

Simple leverage. Didn’t anybody else do the math? BB30/PF30 has proven to be a complete mechanical failure. It was obvious from the outset and I had made good arguments against it when it was first being rolled out. The Shimano system is clearly superior but for some reason cyclists thing that everything has to be … Read more

PVD Dummy Shocks

The proper setup of Downhill and long travel suspension bikes often requires the frequent removal of the shock as well as having the system in a topped out AND bottomed out state. These little dummy shocks allow the rear end to be easily fastend in place to adjust things like chain length, cable routing, chain … Read more

Ashland 12 Mile

Ashland Super D, Cat 1 40-55 Men, 42:26, 14th. Super fun race. A poor showing for me. Ran with full fixed high post. I was a bit out of shape for the climbing and could have saved some time with a dropper post. Can’t wait until next year. I would expect at least a 39 … Read more

The Area Under The Curve.

Thinking about this today. What about the area under the curve with regard to shock rate? Should the area be similar for differerent types of bikes? The shape can change, the duration and the magnitude but will in the end the area be similar? I’m going to think a bit about this… Here’s the curves … Read more

Making a dollar out of fifteen cents.

Cheap stems are rad. They do just fine holding the handlebar in place and come in many sizes. Most are even lightweight. What’s the problem? Tolerances. Most cheap stems are cast or use cast parts in a weldement. These parts have deviations that cause a problem. The issue is that the bottom side of the … Read more

PVD Eccentric Shock Reducers

I read an artical online about a guy that made a few eccentric reducers for shocks to use for adjusting ride height on bicycles. It was a great idea although his execution was rather poor. I instantly decided to add that option to my PVD Reducers. Pretty cool. 1mm offset at both ends of the shock … Read more

Specialized P3, Best shit bike ever!

Mary Pralinsky wanted a beater bike to take to the jumps and to the pump tracks. She wanted something cheap and unbreakable. Nothing can touch a Specialized P3 when it comes to that. The bike is heavy and indestructable. She found someone selling a used one with 90% of the parts for $200 and picked … Read more

Super Beetle / GTI Strut Modification

So…. My friend Matt gave me a call. He had purchased a basket case VW Super Beetle project car. The car had had a lot of work done on it but wasn’t completed and it needed an engine. Matt had a line on a Porsche 914 engine that would drop right in. He purchased both … Read more

Super D(set) Suicide

A Super D bike is a very special kind of bike. 90% DH Trail with 10% Climbing. Super high speeds on smooth to aggressive surfaces. You need a light bike but something that works right when treated rough. 160mm frames tend to work especially well in this situation if set up well for pedaling and … Read more

Gemini (Alpha) – 150mm Hardtail Trailbike

Named for NASA Project Gemini, since it’s the bike after Mercury. This is the first of a pair of bikes, one mountain and one road. They will reflect a snapshot in both disciplines of my bike design techinque. They will share several design cues. They will proabably be painted the same color. Since these will … Read more

There’s something about Mary.

This past week has been all about Mary. Two of them in fact. Mary Pralinsky and Mary Moncorgé. Mary Pralinsky is a friend of mine racing DH as an expert this season. Mary Moncorgé is racing PRO in GRT and nationals with Santa Cruz Alliance. Both needed fully prepped race bikes for the season. They were nice enough to come to … Read more

Refining gearing for long travel suspension

My SC Butcher bike has some serious drive train issues that make it less than fun to be on. It functions, but it’s so floppy and loose that it ends up being something that I think a lot about on a ride. That sucks. Gonna fix that. I don’t want to strip the bike down … Read more

DIY Framebuilding Lecture

Hey folks, Juliana Gallin of How-to Night SF was nice enough to invite me to lecture on how folks can build their own bicycle frames at home. Of course! It’s easy. How-To Night at Bazaar Cafe Wednesday March 9, 2011  •  7 pm  •  How to Build a Bike From Scratch Bazaar Café 5927 California Street, between 21st & … Read more

PVD Magic Ring

Inspired by products designed and made by Magic Motorcycle in the early nineties. Some wild stuff. Probably not the best, but intriguing to say the least. Especially if you are a machinist type like me. So, 2×10 has taken hold in mountain biking. It has a place but certainly 3×10 does as well. Shimano has … Read more

Some cool ‘day job’ stuff just has to go on the site

The radar mount was installed today. I mentioned it in an earlier post. Very cool. It took some planning, lots of rope and safety harnesses but it was installed without issue. A 40 foot drop on one side and an 18 foot drop on the other. No screwing around on this job site.

These are the fun days of development

I’ve been quite busy lately… The modular throttle project is just about done. Final testing takes place this weekend but this revision is assumed to be the last. Prototyping has been a long process for this. The engineering was quite a learning experience for such a simple little part. A 60 degree variable rate cam that … Read more

Cool Radar Mount

This is a neat project from work. It’s a straddle mount that will sit on top of a wall above the water treatment facility on Ocean Beach. It will support a 9′ rotating radar boom against anything the Pacific Ocean can throw at it. 0.375″ stainless steel, plasma cut and welded together.

Gemini Conception

These are the all new PVD headtubes for the 2011 Gemini bikes. A pair of bikes following Mercury. A road and a mountain. They should be completed prior to NAHBS for all to see. Show bikes made to be ridden hard, put away wet and taken out again and again. Top bearing is Cane Creek … Read more

Mercury.

Named for the NASA Mercury space program. Seriously rad! The 2011 PVD Mercury Trailbike. Tapered head tube, 2×10 designed, DMFD, ISCG05 w/slider, BB92, with clearance for 3.0″ tires. Like all PVD Trailbikes, this bike is designed specifically to completely dominate Marin California singletrack. The time tested and challenged design sets the standard for high speed … Read more